Bitmain stock recovery

Download the Recovery file for your ASIC miner model using the links below.

Extract the archive and copy all contents to a USB flash drive up to 32 GB, formatted in FAT32.

Power off the ASIC miner. Insert the flash drive into an OTG cable (or use a microSD card) and connect it to the miner’s MicroUSB port.

Power on the ASIC miner and wait until the green indicator lights up, confirming successful firmware installation.

Power off the miner and remove the OTG cable (or microSD card).

To update your miner to the required firmware version via the WEB interface:

1. Locate your ASIC on the network using Toolkit or similar software, or check your router’s web interface to find the IP address assigned to the miner by the DHCP server.

2. Open a browser, go to the miner’s IP address, and log in with username: root, password: root.

3. Go to SYSTEM → UPDATE, select the WEB update file, and click UPDATE.

   • If Keep Settings is checked, your current settings and pools will be preserved.

   • If unchecked, all settings will be reset to factory defaults.